Assembly Part E - Darwin Fitness FB90 Assembly Instructions Manual

2.9

Assembly Part E

Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
NOTICE
L
First loosely screw all parts together and check that they fit properly. Tighten the screws using
the tool only when you are instructed to do so.
Step 1: Assembly of the Holder Frame and Main Frame
Fix the holder frame (1) to the main frame (2) by using two M10*80 bolts (3), four φ10 washers (5)
and two M10 nuts (5).
28
FB90