Advertisement
4. Use the #1 Phillips screwdriver to attach the Mammoth-2 tape drive to the drive sled
(Figure 3).
Figure 3 Attach the Mammoth-2 to the drive sled.
Note:
Make sure to use only the two screw holes at the top of each side of the
drive sled. There should only be two screws on each side.
6
Spectra 2000 Mammoth-2 Drive Sled Assembly Guide
Assemble the Drive Sled
Advertisement
Need help?
Do you have a question about the Spectra 2000 and is the answer not in the manual?