About This Manual; What You Will Need - Spectra Logic Spectra 2000 Install Manual

About this manual

This guide explains how to assemble a Mammoth-2 drive sled for use with a Spectra 2000
automated tape library.
Caution:
The Mammoth-2 tape drive is a static sensitive device. Use a static
dissipative wrist strap or other ESD equipment/tools for this process.
How long will this take?
This procedure should take less than 15 minutes.

What you will need

You will need a Mammoth-2 Drive Sled Assembly Kit, P.N. 90870556. The Mammoth-2 Drive
Sled Assembly Kit contains:
Part Number
4250
90870157
90870316
90870070
You will also need:
A #1 Phillips screwdriver
A Mammoth-2 drive
4 Spectra 2000 Mammoth-2 Drive Sled Assembly Guide
Introduction
Description
Screws (4)
Spectra 2000 5.25" Drive Sled
SCSI ID cable
Spectra 2000 Mammoth-2 Drive Sled Assembly Guide (this guide)