Initial Set-Up; Downtime After Installation; Miele@Home - Miele TXI 680 WP Operating Instructions Manual

Initial set-up

Downtime after installation


Damage caused by switching the
appliance on too soon.
This can damage the heat pump.
After setting up the tumble dryer,
wait for at least one hour before
starting a drying program.
Removing the protective film
and stickers
 Remove:
- any protective film from the door
- any stickers from the front and from
the lid
Please do not remove any labels
(e.g., the data plate) which are visible
when you open the door.
20

Miele@home

Your tumble dryer is equipped with an
integrated WiFi module.
To use this feature, you will need:
- a WiFi network
- the Miele@mobile app
- a Miele user account You can create
a user account via the Miele@mobile
app.
The Miele@mobile app will guide you as
you connect your tumble dryer to your
home WiFi network.
Once your dryer is connected to your
WiFi network, you can use the app to
carry out various activities, such as:
- controlling your tumble dryer re-
motely
- calling up information on the operat-
ing status of your tumble dryer
- calling up information on the program
sequence of your tumble dryer
Connecting your tumble dryer to your
WiFi network will increase energy con-
sumption, even when the tumble dryer
is switched off.
Before installing the dryer in its final
location, ensure the signal strength is
sufficient for your WiFi network.