Miele TXI 680 WP Operating Instructions Manual page 89

Keypad tone
Each touch of a sensor button is con-
firmed with an audible tone.
Options
- (default setting)
Off
-        (quiet)
-        (loud)
If a selection is not allowed, a negative
signal tone sounds.
Buzzer volume
The buzzer sounds to let you know the
program has finished. The buzzer can
be set to be louder or quieter.
Options
-        (quiet)
-        (default setting)
-        (loud)
Airway indicator
Lint should be removed after drying. In
addition, this indicator will remind you
to clean the filters when a certain
amount of lint has collected in them:

Clean plinth filter. See 
You can decide at what level of lint
this reminder should be given.
Options
You will have an idea of how often this
should be done after a few drying pro-
grams.
- Off
This reminder does not appear. How-
ever, if there is a very severe block-
age in the ducting, the program will
be canceled and the fault message

Clean plinth filter. See 
will appear in the display regardless
of this option.
- Heavy
The reminder only appears when
there is a heavy build-up of lint.
- Normal (default setting)
- Light
The reminder appears when there is
only a small build-up of lint.
Settings
89