Miele TXI 680 WP Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Miele Manuals
  4. Dryer
  5. TXI 680 WP
  6. Operating instructions manual

Miele TXI 680 WP Operating Instructions Manual

Heat-pump dryer
Hide thumbs Also See for TXI 680 WP:
Table of Contents

Advertisement

Quick Links

Operating instructions
Heat-pump dryer
It is essential to read these operating instructions before installation
or use of this appliance. This prevents both personal injury and
damage to the appliance.
en-CA
M.-Nr. 11 677 010

Advertisement

Table of Contents
loading

Related Manuals for Miele TXI 680 WP

Summary of Contents for Miele TXI 680 WP

  • Page 1 Operating instructions Heat-pump dryer It is essential to read these operating instructions before installation or use of this appliance. This prevents both personal injury and damage to the appliance. en-CA M.-Nr. 11 677 010...

  • Page 2: Table Of Contents

    Energy saving tips ..................... 18 Functioning of the heat-pump dryer..............19 Initial commissioning ..................20 Downtime after installation.................. 20 Miele@home ......................20 1. Notes on correct laundry care ..............24 Points to note regarding washed laundry............24 Preparing the laundry before drying..............24 Drying ........................
  • Page 3 Contents Extra options...................... 40 Gentle ........................40 Freshen up......................40 Anti-crease ......................40 Buzzer........................40 Drying program chart – extra options..............41 Changing the program sequence ..............42 Adding or removing laundry ................42 Condensed water container ................43 Emptying the condensed water container ............43 Preparing the condensed water container for the SoftSteam program ....
  • Page 4 Contents Technical Service....................68 Contact in the event of a fault ................68 Warranty ......................68 Optional accessories................... 68 WARNING AND SAFETY INSTRUCTIONS ............70 Installation......................72 Front view ......................72 Rear view......................73 Transporting the tumble dryer ................73 Transporting the tumble dryer to its installation site ........
  • Page 5 Brightness ......................90 Display......................90 Buttons active ....................90 Buttons inactive....................90 Display switch-off....................91 Memory ....................... 91 Anti-Crease......................91 Program info ......................92 Miele@home ......................92 Remote control....................93 SmartGrid ......................93 RemoteUpdate ....................94 Running a RemoteUpdate ................94...

  • Page 6: Caring For The Environment

    Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed.

  • Page 7: Warning And Safety Instructions

    Unauthorized repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Do not make any alterations to the tumble dryer, unless authorized to do so by Miele. Repairs should only be carried out by a Miele approved service technician, otherwise there could be a considerable danger to the user.
  • Page 8 WARNING AND SAFETY INSTRUCTIONS  Important information regarding use of fabric softener sheets: We do not recommend use of fabric softener sheets. Use of fabric softener sheets can clog the surfaces of the lint filters, extending the drying time and increasing energy consumption. During subsequent cleaning, the plastic and surfaces of the lint filters can be damaged! The best results are obtained by using liquid fabric softener in the washing machine.
  • Page 9 WARNING AND SAFETY INSTRUCTIONS  To prevent the risk of fire, the following items must not be tumble dried: - Items which have not been washed. - Items which have not been thoroughly cleaned and are still soiled with grease, oil or other deposits (such as work clothes, kitchen linens or cosmetics cloths with lubricants, cooking oils, grease, lotions, etc, as there is a danger that they might ignite when heated (chemical reaction), even after they have been removed...
  • Page 10 It is essential that this standard safety requirement is observed and regularly tested. If in any doubt, please have the electrical installation inspected by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate grounding system. The electrical socket must be easily accessible so that the dryer can be disconnected from the electricity supply.
  • Page 11 Miele tumble dryer and the Miele washing machine.  If you order a plinth for this tumble dryer (available from Miele as an optional accessory), make sure it is the correct one. ...
  • Page 12 WARNING AND SAFETY INSTRUCTIONS  Heat pump technology and refrigerant: The heat pump in this tumble dryer uses a gaseous refrigerant which is condensed by the compressor. The refrigerant, which is brought to a higher temperature level and liquefied by condensing, is led in a closed circuit through the heat exchanger unit where heat exchange with the circulating drying air takes place.
  • Page 13 WARNING AND SAFETY INSTRUCTIONS Using a fragrance capsule (optional accessory)  Only use genuine Miele original fragrance capsules.  The fragrance capsule must be stored in its original packaging so please make sure you retain this.  Caution: The fragrance can leak out of the capsule! Make sure...
  • Page 14 WARNING AND SAFETY INSTRUCTIONS FCC Declaration of Conformity  This appliance complies with Part 15 of the FCC regulations. This appliance has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules and is subject to the following conditions: This appliance does not cause harmful interference.

  • Page 15: Operating The Tumble Dryer

    Operating the tumble dryer Control panel a Control field d OK sensor button The control field consists of a Confirm the selected values with the display and various sensor buttons. OK sensor button. The individual sensor buttons are e PerfectDry indicator  explained in the following sections.

  • Page 16: Operating The Sensor Buttons

    Operating the tumble dryer f Optical interface j Start/Add laundry sensor button This is used by the Service Touching the Start/Add department as a transmission point. laundry sensor button starts a program. The current program can g Sensor buttons for extra options be interrupted to add laundry.

  • Page 17: Display

    Operating the tumble dryer Identifying the selected option Display  The basic display shows the following   for a drying level program:   An activated option in a list will have a Normal 0:55 check mark  next to it. ...

  • Page 18: Energy Saving Tips

    Energy saving tips Viewing the estimated energy This dryer with heat pump technology consumption is designed for energy-saving drying cycles. However, you can save a little You can view information about the more energy with the following energy consumption of your tumble measures as the drying time is not dryer with the  sensor button.

  • Page 19: Functioning Of The Heat-Pump Dryer

    Functioning of the heat-pump dryer Two separate circuits ensure that the Refrigerant circuit laundry is dried: The refrigerant circuit regulates the heating and cooling of the drying air Dry air circuit through the heat exchanger. The heat The drying air flows through a heat pump is the central component: This exchanger, the drum and several is a compressor that is connected to a...

  • Page 20: Initial Commissioning

    - a WiFi network wait for at least one hour before starting a drying program. - the Miele@mobile app - a Miele user account You can create Removing the protective foil a user account via the Miele@mobile and stickers app.
  • Page 21 Therefore, the availability of featured functions cannot always be guaranteed. Miele@home availability The ability to use the Miele app depends on the availability of the Miele@home service in your country. The Miele@home service is not available in every country.
  • Page 22  Touch the OK sensor button.  Set up now    To set up Miele@home now: Touch the OK sensor button.  To postpone setup until later: Touch the  sensor button until up later appears in the display and press the OK sensor button to confirm.
  • Page 23 Initial commissioning You will then be guided by the display Continuing with and the Miele@mobile app. commissioning  Confirm with the OK sensor button. Before installing the dryer in its final location, ensure the signal strength is  Please see “1. Notes on correct sufficient for your WiFi network.

  • Page 24: Notes On Correct Laundry Care

    1. Notes on correct laundry care Points to note regarding  Risk of fire due to incorrect use washed laundry and operation. The laundry can burn and destroy - When washing very heavily soiled the tumble dryer and the items, ensure that you use sufficient surroundings.

  • Page 25: Drying

    1. Notes on correct laundry care Understanding the care-label Drying symbols Useful tip: See the “Program chart”. This describes the programs and gives Drying their maximum load.  Normal / higher temperature - Always observe the maximum  Low temperature* recommended load for each program. This will mean that the energy *Select Gentle consumption for the amount of...

  • Page 26: Selecting A Program

    2. Selecting a program Switching on the tumble dryer Selecting a program The tumble dryer is switched on when There are three possible ways to select you select a program, and switched off a program. by turning the program selector to the 1.
  • Page 27 2. Selecting programs via the “More 3. Selecting programs via the programs/” setting and the display MobileStart  program selector position and the Miele@mobile app Useful tip: In order to use MobileStart , the tumble dryer must be logged on to the WiFi network and Remote control must be switched on.

  • Page 28: Loading The Tumble Dryer

    3. Loading the tumble dryer 2 sockets for inserting fragrance Loading the laundry capsules Textiles may be damaged. The “Fragrance capsule” chapter Before loading, read “1. Notes on describes how to use the fragrance correct laundry care”. capsule. If you are not using a fragrance capsule: push the tab down completely (see arrow) so that the ...

  • Page 29: Selecting Program Settings

    4. Selecting program settings Time-controlled and other programs Program settings Time Dry, Cold Air, Basket, DryFresh Selecting the drying level for programs with a selectable drying You can change the duration in 10- level minute increments. Normal, Delicates, Bed Linens, Dress Cold Air: 20 min –...

  • Page 30: Selecting An Extra Option

    4. Selecting program settings Setting the delay start time Selecting an extra option  Touch the  sensor button. Gentle Freshen up The following will appear in the display:  Anti-crease Buzzer Start in   Touch a sensor button to select the desired extra option.
  • Page 31 4. Selecting program settings  Set a time value of 00:00 h with the Setting the timeframe  sensor buttons. Confirm with the If you have activated the SmartGrid OK sensor button. function in Settings, SmartStart in The selected delay start time has been instead of will appear in the Start in...

  • Page 32: Starting A Program

    5. Starting a program The drying level reached for the Starting a program selected drying level program will light  Touch the flashing Start/Add laundry up in the display. sensor button. You can view the selected drying level or time again: The Start/Add laundry sensor button will light up and Drying appears in the ...

  • Page 33: Program End - Removing The Laundry

    6. Program end – removing the laundry  Empty the condensed water End of program container. The program is finished when End/Anti- Useful tip: The condensed water can Crease appears in the display. be used for the SoftSteam program. The Start/Add laundry sensor light goes See “Condensed water container –...

  • Page 34: Program Chart

    Program chart All weights marked with * are based on the weight of dry laundry. Normal Full load (17.6 lb/8 kg)* Extra dry, Normal plus, Normal**, Slightly dry Items Single and multi-layered cotton items. For example, T-shirts, underwear, baby clothes, workwear, jackets, covers, aprons, overalls, hand towels, bath towels, bathrobes and flannelette/bed linen.

  • Page 35: Bed Linens

    For all shirts and blouses. Denims Small load (6.6 lb/3 kg)* Normal plus, Normal, Slightly dry, Hand iron, Hand iron Items All denim garments, e.g. jackets, jeans, shirts and skirts. MobileStart  The Miele@mobile app is used to select the programs and operate the appliance.
  • Page 36 Program chart Smoothing Very small load (2.2 lb/1 kg)* Normal, Hand iron Items - Cotton and linen fabric. - For wrinkle-free items made of cotton, mixed or synthetic fibre. For example, pants, anoraks and shirts. - This program smoothes out creasing caused during the spin cycle in the washing machine.

  • Page 37: More Programs

    Program chart Express Half load (8.8 lb/4 kg)* Extra dry, Normal plus, Normal, Slightly dry, Hand iron, Hand iron, Machine iron Items Suitable for resistant garments for the Normal program. Note The program duration is shortened. Outdoor Small load (5.5 lb / 2.5 kg)* Normal, Hand iron Items Outdoor clothing which is suitable for drying in a tumble dryer.

  • Page 38: Pillows

    Program chart Pillows 1–2 pillows 15 3/4" (40 x 80 cm) or 1 pillow 31 1/2" (80 x 80 cm) Items Pillows suitable for drying in a tumble dryer, with feather, down or synthetic fillings. Note/tip: - Items are dried to a Normal level only. - Pillows can still feel damp after being dried. You can use this program several times until the pillow feels dry.

  • Page 39: Basket

    Program chart Basket Load for basket (7.7 lb/3.5 kg) Note - This program may only be used with the Miele dryer basket (optional accessory) fitted. - It is essential to observe the operating instructions for the dryer basket! Fabric - It is essential to observe the operating instructions for the dryer...

  • Page 40: Extra Options

    Extra options Anti-crease The drying programs can be augmented with various extra options. After the program has finished, the However, Freshen up and Gentle drum will continue to rotate in a certain cannot be combined. rhythm. This “Anti-crease rhythm” helps to prevent creasing if the laundry is not Gentle Freshen up...

  • Page 41: Drying Program Chart - Extra Options

    Extra options Drying program chart – extra options Freshen up Gentle Anti-crease Buzzer Normal Delicates – Bed Linens – – Woolens/Silks – – – Dress Shirts Denims Smoothing – SoftSteam – – Express – – Outdoor – Time Dry – Table Linens/ –...

  • Page 42: Changing The Program Sequence

    Changing the program sequence Changing a program once it Adding or removing laundry has started You have forgotten an item of laundry, but the program has already started. It is no longer possible to change the selected program. This prevents the ...

  • Page 43: Condensed Water Container

    Condensed water container Emptying the condensed water container The condensed water is collected in the condensed water container. Empty the condensed water container after every drying program. When the maximum level in the condensed water container is reached, the following message lights up in the display: Empty container See ...

  • Page 44: Preparing The Condensed Water Container For The Softsteam Program

    Condensed water container Preparing the condensed water container for the SoftSteam program During the SoftSteam program, the condensed water collected in the condensed water container is sprayed into the drum via a spray jet. The condensed water container must therefore be filled with water to at least the –min–...

  • Page 45: Fragrance Capsule

    Fragrance capsule FragranceDos Removing the protective seal from the fragrance flacon Fragrance capsules (optional accessories) can be used to give your Only hold the fragrance flacon as laundry a pleasant scent. illustrated. Do not hold it at an angle or tip it as the fragrance will leak out This tumble dryer has 2 sockets for of the pod.

  • Page 46: Inserting A Fragrance Capsule

    Fragrance capsule Inserting a fragrance capsule  Open the door of the tumble dryer. The fragrance capsule is inserted in the upper lint filter. There is one socket on the left-hand side of the recessed grip and another on the right-hand side.

  • Page 47: Setting The Fragrance Intensity

    Fragrance capsule released into the laundry effectively. The fragrance will also be noticeable in the room air during the process. The Cold Air program will not generally apply fragrance. Closing the fragrance flacon After drying, the fragrance flacon should be closed to prevent the fragrance from escaping needlessly.

  • Page 48: Removing / Replacing The Fragrance Capsule

    - Always store in a cool, dry place Fragrance capsules are available to away from direct sunlight. order from Miele dealers, Miele - When purchasing new fragrance Service, or online. flacons, only remove the protective seal just before use.

  • Page 49: Cleaning And Care

    Cleaning and care Removing visible lint Cleaning the lint filters Useful tip: You can also use a vacuum This tumble dryer has 2 lint filters in cleaner so that you can remove the lint the door opening: the upper and lower without touching it.

  • Page 50: Cleaning The Lint Filters And Air Flow Openings Thoroughly

    Cleaning and care  Remove the lint (see arrows) from the  Turn the yellow knob on the lower lint filter surface of all the lint filters and filter in the direction of the arrow (until the perforated laundry deflector. you hear it click).
  • Page 51 Cleaning and care Cleaning the lint filters with water  Wipe the smooth plastic surfaces of the lint filters with a damp cloth to clean them.  Rinse the lint filters through with warm running water.  Shake the lint filters thoroughly and then dry them carefully.
  • Page 52 Cleaning instructions when using Option 3 fabric softener sheets  Wet the surfaces of the lint filters with a liquid colour detergent (e.g. Miele If you are using fabric softener sheets, Ultra Colour Liquid Laundry please follow these warnings and Detergent).

  • Page 53: Cleaning The Plinth Filter

    Cleaning and care Cleaning the plinth filter Clean the plinth filter when the program duration has been extended or when this message appears in the display: Clean the lint and plinth filters. See the Operating Instructions for more information. To delete the message: ...

  • Page 54: Cleaning The Plinth Filter

    Cleaning and care Cleaning the plinth filter  Fit the plinth filter back on the handle. Make sure it is the correct way round.  Pull the handle out of the plinth filter.  Clean the plinth filter thoroughly under running water. ...

  • Page 55: Cleaning The Plinth Filter Flap

    Cleaning and care Cleaning the plinth filter flap Cleaning the tumble dryer Disconnect the tumble dryer from the electrical supply.  Damage due to the use of unsuitable care products. Unsuitable care products could damage plastic surfaces and other parts. Do not use any solvents, abrasive cleaners, glass cleaners, or all- purpose cleaners.

  • Page 56: Frequently Asked Questions

    Frequently Asked Questions With the help of the following guide, minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This will save you time and money because you won't need a service call.
  • Page 57 Frequently Asked Questions Message Possible cause and solution The system has been clogged by lint or detergent  Clean plinth filter. residue. See  lights up  To switch off the message: press after a program has been  Clean the lint filters and the plinth filter. cancelled.
  • Page 58  Switch the dryer off and then on again. lights up after a program  Start a program. has been If the program is interrupted again and an error interrupted. message appears, there is a fault. Contact Miele Technical Service.

  • Page 59: Unsatisfactory Drying Results

    Frequently Asked Questions Unsatisfactory drying results Problem Possible cause and solution The laundry is not The load consisted of different types of fabric. sufficiently dry.  Finish drying using the Time Dry program.  Select a more suitable program next time. Tip: You can alter the residual moisture level for some programs.

  • Page 60: The Drying Cycle Duration Is Very Long

    Frequently Asked Questions The drying cycle duration is very long Problem Possible cause and solution The drying process The room in which the tumble dryer is located is too goes on too long or warm. even switches off.*  Ventilate the room thoroughly. Detergent residue, hair, and fine lint can clog the filters.

  • Page 61: General Problems With The Tumble Dryer

    Frequently Asked Questions General problems with the tumble dryer Problem Possible cause and solution You can hear operating This is not a fault. noises The compressor (heat pump) is operating. (buzzing / humming).  No action required. These noises are quite normal and can be heard when the compressor is operating.

  • Page 62: Replacing The Plinth Filter

    Frequently Asked Questions Deformation Replacing the plinth filter The heat exchanger can clog up. Replace the plinth filter immediately if you see the following signs of wear before or after cleaning (optional accessory). Poor fit Deformations indicate that the plinth filter has become worn.
  • Page 63 Frequently Asked Questions Cracks, tears, indentations White residues or residues of other colours Residues arise from laundry fibres and traces of detergent components. They can be found on the front and side edges of the plinth filter. In extreme cases, they can form stubborn crust. Residues are a sign that the plinth filter no is longer a snug fit at the sides, even if it appears to be perfect:...

  • Page 64: Reactivating The Plinth Filter

    Frequently Asked Questions Reactivating the plinth filter Checking the heat exchanger unit You can reactivate one or more dirty plinth filters in the washing machine.  Risk of injury from sharp cooling You will then be able to use the plinth fins.

  • Page 65: Cleaning The Lint Filter In The Condensed Water Container

    Frequently Asked Questions Cleaning the lint filter in the condensed water container In some circumstances, there can be problems running the SoftSteam program. The lint filter at the end of the hose which is connected to the rubber seal in the condensed water container could be blocked.

  • Page 66: Replacing The Blocked Spray Jet For The Softsteam Program

    Frequently Asked Questions  Open the door of the tumble dryer. Replacing the blocked spray jet for the SoftSteam program The spray jet is located in the top left of the door opening. Limescale deposits will impair the spray jet. In this case, the spray jet must be removed and replaced with a new one (see “Optional accessories”).

  • Page 67: Bottom Right Grille

    Frequently Asked Questions Bottom right grille  Danger of injury! Do not touch the cooling fins with your hands. You  In general, the cooling fins could cut yourself. behind the grille on the bottom right do not need cleaning. They should ...
  • Page 68 Optional accessories Contact information for Miele Service Optional accessories for this tumble can be found at the end of this dryer are available from Miele Technical document. Service. Please quote the model identifier and You also can order these and many...
  • Page 69 Installation instructions Alteration rights reserved. Visit our website for all the current product specifications, technical appliance information, and warranty information. To avoid accidents or damage to the appliance, please read these instructions before installing and/or using it.
  • Page 70  Unauthorized repairs could result in unforeseen dangers for the user, for which Miele cannot accept liability. Repairs should only be carried out by a Miele approved service technician, otherwise any subsequent damage will not be covered by the warranty.
  • Page 71  This dryer is not intended for wall-insert.  Should you have any questions regarding installation, please get in touch at: 1-800-999-1360 techserv@mieleusa.com 1-800-565-6435 service@miele.ca KEEP THESE OPERATING INSTRUCTIONS IN A SAFE PLACE...
  • Page 72 *INSTALLATION* Installation Front view a Drain hose for condensed water e Door – do not open during drying b Power cord f Access panel to the heat exchanger –  Observe the section entitled and plinth filter “Electrical connection”! – do not open during drying c Control panel g Cold air intake grille d Condensed water container...
  • Page 73 *INSTALLATION* Installation Rear view  If the tumble dryer is being transported on its side, it must be tipped onto its left or right side. a Protruding lid for holding when  If the tumble dryer is being moving the tumble dryer (see transported upright and you are using arrows) a hand truck, you must transport it...
  • Page 74 *INSTALLATION* Installation Downtime after installation Installation  Damage caused by switching the Installation appliance on too soon. Levelling the tumble dryer This can damage the heat pump. After setting up the tumble dryer,  Ensure that no closeable door, wait for at least one hour before sliding door or an oppositely hinged starting a drying program.
  • Page 75 *INSTALLATION* Installation Before moving the tumble dryer Installing the dryer in a closet again Minimum installation distance A small quantity of condensed water  that remains in the area around the You must insert sufficiently large pump after the drying process can run ventilation openings into the closet out if the dryer is tilted.
  • Page 76 *INSTALLATION* Installation Installing the dryer in a floor-to-ceiling closet You can also insert a ventilation opening at the top of the closet. In addition, you must also provide an opening on the bottom side of the closet door. Direct ventilation is also possible via an air conditioning outlet in the closet.
  • Page 77 *INSTALLATION* Installation Washer-dryer stack Product dimensions - WTV502 or WTV512 Dimensions  1.60 m drain hose, detachable, top right on the rear  2 m wiring, bottom right on the rear Installation on a plinth - WTS 510...
  • Page 78 Miele inspected by a qualified electrician. (USA or CDN). Miele cannot be held liable for the consequences of an inadequate grounding system. The electrical socket must be easily accessible so that the dryer can be disconnected from the electricity supply.
  • Page 79 *INSTALLATION* Installation External draining of condensed water Note When drying is in progress, condensed water is pumped into the condensed water container through the drain hose which is located at the back of the dryer. The condensed water can also be externally drained away via the drain hose on the back of the dryer.
  • Page 80 *INSTALLATION* Installation  Hold the door securely and pull it Changing the door hinging forwards: to remove the door you will You can change the door hinging on need to pull the base plate of the this tumble dryer yourself. hinge with its 2 pins out of the dryer.
  • Page 81 *INSTALLATION* Installation  Turn the door lock by 180°. 3. Remove the lock catch from the door  Press the door lock into the openings  First take the rubber seal off the door  on the opposite side of the door and place this to one side.
  • Page 82 *INSTALLATION* Installation 4. Dismantle the door hinge from the door The door hinge cover must be unclipped from position  and then removed.  Remove the lock catch from the cover. This lock catch cover is no longer needed.  Use a screwdriver to press down gently on position ...
  • Page 83 *INSTALLATION* Installation 5. Change the door hinge on the door Useful tip: In some circumstances, the rods can be difficult to dislodge. The door hinge is secured to the door Moving the screwdriver with a levering with 2 angled rods. These rods need action while pulling at the same time to be removed with a screwdriver or may help to work the rods free.
  • Page 84 *INSTALLATION* Installation 6. Change the lock catch on the door  You now need the new door hinge cover supplied with the dryer.  You now need the new lock catch cover supplied with the dryer which you have already fitted with the lock catch.
  • Page 85 *INSTALLATION* Installation Refitting  Now that you have changed the door hinging, the door will open from 7. Refit the door the opposite side.  Press the rubber seal back into the groove on the door.  Push the orange marker round to the other side so that you will see at ...
  • Page 86 Technical data Height 33 7/16" (850 mm) Width 23 7/16" (596 mm) Depth 25 5/8" (643 mm) Depth with door open 42 3/8" (1077 mm) Slot-in Stackable Weight Approx. 137 lbs (62 kg) Drum volume 31.7 gal (120 L) Load quantity 17.6 lb (8 kg) dry laundry Capacity of condensed water container 1.27 gal (4.8 L) Hose length 63"...
  • Page 87 Settings Selecting settings Calling up settings  Touch the  or  sensor buttons You can alter the tumble dryer's until the setting you want appears in electronics to suit changing the display. requirements with the settings. The settings can be altered at any - The ...
  • Page 88 Settings Language  Welcome tone The display can be set to appear in The volume for the welcome tone can one of several different languages. be set to one of 7 different settings. The flag  after the word Language acts Options as a guide in case a language which is not understood is set.
  • Page 89 Settings Keypad tone Airway indicator Each touch of a sensor button is Lint should be removed after drying. In confirmed with an audible tone. addition, this indicator will remind you to clean the filters when a certain Options amount of lint has collected in them: ...
  • Page 90 If you forget the code, the This setting is only relevant for regions dryer will need to be unlocked by with very soft water. Miele Service. Very soft water can result in unsatisfactory drying results. Brightness You should only select this setting if...
  • Page 91 Settings Display switch-off Memory To save energy, the display and The dryer saves the settings that were sensor buttons will go out after selected last for a drying program 10 minutes. The Start/Add laundry (drying stage and/or extra option, or button flashes slowly. You can alter the duration for some programs).
  • Page 92 Miele@home setting again. connection. – (visible if Miele@home is Deactivate activated) Miele@home remains set up; the WiFi function is turned off. – (visible if Miele@home is Activate deactivated) The WiFi function is reactivated.
  • Page 93 Miele@home setting is set up and activated. up and activated. Once the Miele@mobile app has been This function can be used for starting installed on your mobile device, you your tumble dryer automatically at a can check the status of your tumble...
  • Page 94 If you select “Start later”, the you can continue to use your tumble prompt to run the RemoteUpdate will dryer in the usual way. However, Miele be displayed again the next time you recommends installing RemoteUpdates. switch on your tumble dryer.
  • Page 95 Please have the model and serial number of your appliance available when contacting Customer Service. Canada Importer Miele Limited Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.ca Customer Care Centre Phone: 800 565-6435 customercare@miele.ca Germany Manufacturer Miele &...
  • Page 96 TXI 680 WP en-CA M.-Nr. 11 677 010 / 01...

Table of Contents