Table of Contents
Advertisement
Industrial Event Camera
Maintenance and Repair
6
Maintenance and Repair
6.1
Servicing
Danger!
Danger to life due to electrical current!
Contact with live parts causes immediate danger to life.
•
Allow only qualified electricians to carry out work on the electrical installation.
•
Switch off the power supply before carrying out servicing, cleaning, and repairs, and pre-
vent the supply from being switched on again.
•
Keep the live parts free from moisture.
The device is maintenance-free. To get the best possible performance out of your device, keep
the optical unit on the device clean, and clean it when necessary.
Observe the following instructions when cleaning:
•
Do not touch the optical unit with your fingers.
•
Do not immerse the device in water. Do not spray the device with water or other liquids.
•
Do not use abrasive agents to clean the surface of the device.
•
Use a cotton or paper cloth moistened (not soaked) with water or isopropyl alcohol.
•
Remove any residual alcohol using a cotton or paper cloth moistened (not soaked) with
distilled water.
•
Wipe the device surfaces dry using a lint-free cloth.
6.2
Repair
The device must not be repaired, changed, or manipulated. In case of failure, always replace
the device with an original device.
39
Advertisement
Table of Contents
