Table of Contents
Advertisement
Industrial Event Camera
Web Interface
When settings are saved on the Settings page, the ipcam_settings.json file is created or
overwritten.
Delete this file from the SD card to reset the camera to factory settings. This is only necessary if
the password for the admin user has been forgotten. Otherwise, all settings can be adjusted via
the user interface.
By clicking the Backup/Restore button, you can either download the settings file or restore the
settings from a previously backed up file. The backup file should not be edited manually.
Figure 5.3
Camera
Setting
Camera name
Rotation
Focus setpoint
28
Settings
Default Setting
-
0 °
-
Values
Description
0 ... 255 characters,
The name of the cam-
a ... z, A ... Z, 0 - 9, "-";
era, which is freely
no "-" as the first or
selectable, is dis-
last character;
played on the start
special characters are
page and can be
not allowed.
superimposed on the
camera stream.
0 °, 90 °, 180 °, 270 °
Image rotation. The
aspect ratio remains
the same, which
enlarges the image by
90 ° and 270 °.
Far - Near
The preview is used to
set the focus distance.
Advertisement
Table of Contents
