Table of Contents
Advertisement
Industrial Event Camera
Functions
Note
Recording Fault
A recording fault is indicated by the blue LED flashing several times after a trigger has
occurred.
Possible reasons for this include:
•
Memory card is full
•
Memory card is missing
•
Memory card is faulty
Note
Recording with a Resolution of 1920 x 1080 Pixels
Live view, recording, and RTSP share the limited computing power of the camera. Recording
with a resolution of 1920 x 1080 pixels requires the most computing power and can result in the
live view having a very low frame rate. To reduce the impact on the live view or in case of other
performance problems, we recommend disabling the RTSP stream when recording with a
resolution of 1920 x 1080 pixels.
When using 1920 x 1080, only one recording can run at a time.
When using a recording resolution of 1920 x 1080 pixels, the field of view is reduced due to
sensor limitations. This applies to all streams, although only the recording function supports
1920 x 1080.
Operating Limits and Recommendations
The operating limits are automatically enforced by the system. The operating recommenda-
tions indicate the limits of the system as tested by the manufacturer. If the system is used out-
side of these limits, performance can be affected and manufacturer support is not always
guaranteed.
Feature
MicroSD memory capacity
Count of recordings
Minimum time interval between recordings
Simultaneous recordings
Simultaneous HTTP connections
Simultaneous MJPEG streams
Simultaneous RTSP streams
Type
Value
Recommendation
8 GB
Recommendation
10,000
Limit value
2 s
Limit value
3
Limit value
8
Recommendation
2
Recommendation
1
23
Advertisement
Table of Contents
