Table of Contents
Advertisement
Industrial Event Camera
Web Interface
Figure 5.12
First, the update file is uploaded to the camera. The upload speed depends on the network
connection between the user's computer and the camera. When the upload is complete, the
update file is checked and the update process begins. This may take a few minutes. Do not
cancel the process or interrupt the power supply to the camera while the update is taking place.
The camera restarts once the update is complete.
Note
Update fault
If something has gone wrong and the camera cannot start the new software version following a
restart, it will automatically revert to a backup copy of the old software, which is available again
after a restart.
5.3.6
REST API Interface
REST API allows an individual user interface to be programmed and for the camera to be inte-
grated directly into IT systems. The REST API can read out information and issue commands
(e.g., a trigger signal).
http://<camera-ip>/api/ui/ takes you to the API description / command list. Individual
commands can be tested here.
Update
37
Advertisement
Table of Contents
