Pepperl+Fuchs VOC M-F256-B12-V1D-CR0 Series Manual page 32

Industrial Event Camera
Web Interface
Access
Setting
Admin user name
Admin password
Viewer user name
Viewer password
Network
Setting
IP address
Netmask (CIDR)
Gateway IP address
DNS server IP
address
DHCP
NTP server address
Time zone
FTP Upload
Automatically upload snapshots (.jpg) and/or videos (.mp4) of events to an FTP server. Failed
uploads are not repeated. This function is available from firmware 2.2.0.
32
Default Setting Values
admin 1 ... 255 characters
<empty> 1 ... 50 characters
viewer 1 ... 255 characters
<empty> 1 ... 50 characters
Default Setting Values
192.168.100.50 IPv4 address
24 0 – 30
<empty> IPv4 address, optional The gateway is
<empty> IPv4 address, optional DNS server, currently
enabled -
<empty> IPv4 address, optional NTP server. Required
Europe/Berlin -
Description
User name for admin
user
Password for the
admin user. Password
protection can be dis-
abled.
User name for viewer
user
Password for the
viewer user. Pass-
word protection can
be disabled.
Description
The IPv4 address of
the camera If DHCP is
enabled, it is used as
the fallback address.
Netmask in CIDR
notation
required if the NTP
server is on a different
subnet.
not required
DHCP enabled. If a
DHCP server is not
available, the camera
uses the set IP
address as the static
address.
to set the time on the
camera.
Time zone of the cam-
era for local time in the
overlay and record-
ings.