Pepperl+Fuchs VOC M-F256-B12-V1D-CR0 Series Manual page 20

Industrial Event Camera
Installation
The Properties window for the TCP/IP protocol opens.
6.
Select the "General" tab.
7.
Select the input function "Use the following IP address."
8.
Enter the IP address of the sensor, but only the first three segments of the IP address. The last
segment must be different from the IP address of the sensor.
9.
In this example, enter the following IP address and subnet mask:
• IP address: 192.168.100.100
• Subnet mask: 255.255.255.0
10.
Click "OK" and click "Cancel" in the next dialog.
This completes the network configuration so that the device can be used.
20