Table of Contents
Advertisement
Industrial Event Camera
Web Interface
4.
Locate the focus slider (3) at the bottom of the Preview window. This slider allows you to
manually adjust the focus setpoint. Note the icons at the edge of the slider. There is a flower
icon (4) for close-ups and a mountain icon (5) for distant shots.
5.
Move the slider to the right toward the flower icon to adjust the focus point for close-ups. This
movement optimizes focus on nearby objects.
6.
Move the slider to the left toward the mountain icon to adjust the focus point for distant shots.
This movement optimizes focus on distant objects.
7.
Check the on-screen preview as you move the slider to make sure the focus is correct. Adjust
the slider until the desired focus is achieved.
8.
After setting the desired focus point, confirm your selection with the "Submit" button (6) and
close the focus menu. To transfer the settings to the camera, select the "Save changes and
restart camera" button (7).
The camera will now reboot to apply the changes. During the reboot, the camera's LEDs will
display certain signals to indicate progress (see chapter 2.4).
Streams
Setting
Resolution of the live
stream
Quality of the live
stream
RTSP
The RTSP stream can be switched between stream 1 and stream 2.
•
Stream 1: up to 1280 x 720 (configurable), 24 fps
•
Stream 2: 640 x 360, 3 fps
•
RTSP stream can be protected with name/password
Figure 5.5
30
Default Setting
1280 x 720
100
Stream 1
Values
Description
1280 x 720,
Resolution of the live
1024 x 576,
stream
960 x 540, 800 x 450,
640 x 360
0 ... 100 %
Quality of the live
stream
Stream 2
Advertisement
Table of Contents
