Table of Contents
Advertisement
Set up, install, and configure
•
Load envelope with the flap side down and against the right side of the paper guide.
3
Feed the paper until its leading edge gets pulled in.
Notes:
•
To avoid paper jams, do not force paper into the manual feeder.
•
Before loading another sheet, wait for a message to appear on the display.
Linking trays
1
From the home screen, touch Settings > Paper > Tray Configuration > select a paper source.
2
Set the same paper size and paper type for the trays that you are linking.
3
From the home screen, touch Settings > Device > Maintenance > Config Menu > Tray Configuration >
Tray Linking.
4
Touch Automatic.
To unlink trays, make sure that no trays have the same paper size and paper type settings.
Warning—Potential Damage: The temperature of the fuser varies according to the specified paper type. To
avoid printing issues, match the paper type setting in the printer with the paper loaded in the tray.
Installing and updating software, drivers, and firmware
Installing the printer software
Notes:
•
The print driver is included in the software installer package.
•
For Macintosh computers with macOS version 10.7 or later, you do not need to install the driver to print
on an AirPrint-certified printer. If you want custom printing features, then download the print driver.
1
Obtain a copy of the software installer package.
•
From the software CD that came with your printer.
•
From our website or the place where you purchased the printer.
2
Run the installer, and then follow the instructions on the computer screen.
39
Advertisement
Table of Contents
