Lexmark M C240FW User Manual page 116

Use printer menus
Ethernet
Menu item
Network Speed
IPv4
Enable DHCP
On*
Off
IPv4
Set Static IP Address
IP Address
Netmask
Gateway
IPv6
Enable IPv6
Off
On*
IPv6
Enable DHCPv6
Off*
On
IPv6
Stateless Address
Autoconfiguration
Off
On*
IPv6
DNS Address
IPv6
Manually Assigned IPV6
Address
IPv6
Manually Assigned IPV6 Router
IPv6
Address Prefix
0–128 (64*)
IPv6
All IPv6 Addresses
IPv6
All IPv6 Router Addresses
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Show the speed of an active network adapter.
Enable Dynamic Host Configuration Protocol (DHCP).
Note: DHCP is a standard protocol that allows a server to distribute IP
addressing and configuration information to clients in a dynamic manner.
Set the static IP address of your printer.
Enable IPv6 in the printer.
Enable DHCPv6 in the printer.
Set the network adapter to accept the automatic IPv6 address configuration
entries provided by a router.
Specify the DNS server address.
Assign the IPv6 address.
Note: This menu item appears only in some printer models.
Assign the IPv6 router address.
Note: This menu item appears only in some printer models.
Specify the address prefix.
Show all IPv6 addresses.
Show all IPv6 router addresses.
116