Lexmark M C240FW User Manual page 117

Use printer menus
Menu item
Network Address
UAA
LAA
PCL SmartSwitch
Off
On*
PS SmartSwitch
On*
Off*
Mac Binary PS
Auto*
On
Off
Energy Efficient Ethernet
Off
On
Auto*
Note: An asterisk (*) next to a value indicates the factory default setting.
TCP/IP
Note: This menu appears only in network printers or printers attached to print servers.
Menu item
Set Hostname
Domain Name
Allow DHCP/BOOTP to update
NTP server
On*
Off
Zero Configuration Name
Enable Auto IP
On*
Off
DNS Address
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Show the printer Media Access Control (MAC) addresses: Locally Administered
Address (LAA) and Universally Administered Address (UAA).
Note: You can change the printer LAA manually.
Set the printer to switch automatically to PCL emulation when a print job
requires it, regardless of the default printer language.
Note: If PCL SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Set the printer to switch automatically to PS emulation when a print job requires
it, regardless of the default printer language.
Note: If PS SmartSwitch is off, then the printer does not examine incoming
data and uses the default printer language specified in the Setup menu.
Set the printer to process Macintosh binary PostScript print jobs.
Notes:
•
On processes raw binary PostScript print jobs.
•
Off filters print jobs using the standard protocol.
Reduce power consumption when the printer does not receive data from the
Ethernet network.
Description
Set the current TCP/IP host name.
Set the domain name.
Allow the DHCP and BOOTP clients to update the NTP settings of the printer.
Specify a service name for the zero configuration network.
Assign an IP address automatically.
Specify the current Domain Name System (DNS) server address.
117