Picture Settings - Color; White Balance - Bosch TINYON IP 2000 WI Software Manual

Camera browser interface
Table of Contents

Advertisement

38
en | Camera
7.2
Picture settings – Color
Contrast (0...255)
Adjust the contrast with the slider from 0 to 255.
Saturation (0...255)
Adjust the color saturation with the slider from 0 to 255.
Brightness (0...255)
Adjust the brightness with the slider from 0 to 255.
7.2.1

White balance

Hold
Click Hold to put ATW on hold and save the current color
settings. The mode changes to manual.
R-gain
In Manual white balance mode, adjust the red gain slider to
offset the factory white point alignment (reducing red
introduces more cyan).
G-gain
In Manual white balance mode, adjust the green gain slider to
offset the factory white point alignment (reducing green
introduces more magenta).
B-gain
In Manual white balance mode, adjust the blue gain slider to
offset the factory white point alignment (reducing blue
introduces more yellow).
Note:
It is only necessary to change the white point offset for special
scene conditions.
2015.01 | v1.59x | AM18-Q0676
Standard auto mode allows the camera to continually
adjust for optimal color reproduction in an outdoor
environment.
In Manual mode the Red, Green, and Blue gain can be
manually set to a desired position.
Camera Browser
Interface
Bosch Security Systems

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tinyon ip 2000 pir

Table of Contents