Standard Recording; Alarm Recording - Bosch TINYON IP 2000 WI Software Manual

Camera Browser
Interface
Recording includes
Specify whether additional data, such as audio (if available) or
metadata (for example, alarms or VCA data) should also be
recorded. (If audio is available, you can change the global audio
format by clicking the audio format link.)
Note:
Including metadata could make subsequent searches of
recordings easier but it requires additional memory capacity.
Without metadata, it is not possible to include video content
analysis in recordings.
9.3.2

Standard recording

Select the mode for standard recordings:
–
–
–
Stream
Select the stream to be used for standard recordings:
–
–
–
9.3.3

Alarm recording

Select a period for the Pre-alarm time from the list box.
Select a period for the Post-alarm time from the list box.
Alarm stream
Select the stream to be used for alarm recordings:
–
–
–
Bosch Security Systems
Continuous: the recording proceeds continuously. If the
maximum recording capacity is reached, older recordings
are overwritten automatically.
Pre-alarm: recording takes place in the pre-alarm time,
during the alarm and during the post-alarm time only.
Off: no automatic recording takes place.
Stream 1
Stream 2
I-frames only
Stream 1
Stream 2
I-frames only
Recording | en
2015.01 | v1.59x | AM18-Q0676
59