Table of Contents
Advertisement
28
en | General settings
5.3
Date/Time
5.3.1
Date format
Select the required date format.
5.3.2
Device date / Device time
If there are multiple devices operating in your system or
network, it is important to synchronize their internal clocks. For
example, it is only possible to identify and correctly evaluate
simultaneous recordings when all devices are operating on the
same time.
1.
2.
Note:
It is important that the date/time is correct for recording. An
incorrect date/time setting could prevent correct recording.
5.3.3
Device time zone
Select the time zone in which the system is located.
5.3.4
Daylight saving time
The internal clock can switch automatically between normal and
daylight saving time (DST). The unit already contains the data
for DST switch-overs for many years in advance. If the date, time
and zone have been set up correctly, a DST table is
automatically created.
If you decide to create alternative daylight saving time dates by
editing the table, note that values occur in linked pairs (DST
start and end dates).
2015.01 | v1.59x | AM18-Q0676
Enter the current date. Since the device time is controlled
by the internal clock, it is not necessary to enter the day of
the week – it is added automatically.
Enter the current time or click Sync to PC to apply the
system time from your computer to the device.
Camera Browser
Interface
Bosch Security Systems
Advertisement
Table of Contents
