Electrical Connection; Installation - STEINEL 067304 Manual

4� Electrical connection
Concealed electrical connection with concealed IP module (Fig� 4�1)
Concealed electrical connection with surface-mounted IP module (Fig� 4�2)
Surface-mounted electrical connection with surface-mounted IP module
(Fig� 4�2)
Connection is made via the LAN cable:
– PoE 802.3af class 2
– PoE 24-57 V
Connection examples for IP
– Connecting a single sensor to a PC via a network power adapter. (Fig. 4.3)
– Connecting several sensors to a switch with POE functionality for access
to PC. (Fig. 4.4)
– Integrating several sensors into a network infrastructure via a switch with
POE functionality. (Fig. 4.5)
5� Installation
Preparing for installation
• Check all components for damage. Do not use the product if it is damaged.
• Select an appropriate site to install the product.
– Taking into account the optical sensor's reach. (Fig. 5.1)
H in m
X min in m
– Taking into account the HF sensor's motion detection.
– Allowing for the distance from the wall (5 cm). (Fig. 5.2)
– Vibration-free.
– No obstacles in detection zone (e.g. metal objects or water walls)
– Not in explosive atmospheres.
– Not on normally flammable surfaces.
4 W
2.5 3
0.8 1
– 35 –
4 5
1.1 1.3