Table of Contents
Advertisement
3. Select Diagnosis Type.
4. Set the corresponding parameters.
Alarm Detection Interval
The time interval to detect the exception.
Sensitivity
The higher the value is, the more easily the exception will be detected, and the higher
possibility of misinformation would be.
Alarm Delay Times
The device uploads the alarm when the alarm reaches the set number of times.
5. Check the selected diagnosis type, and the related type will be detected.
6. Set arming schedule. See Set Arming Schedule .
7. Set linkage method. See Linkage Method Settings .
8. Click Save.
Note
The function is only supported by certain models. The actual display varies with models.
6.6 Set Audio Exception Detection
Audio exception detection function detects the abnormal sound in the scene, such as the sudden
increase/decrease of the sound intensity, and some certain actions can be taken as response.
Steps
1. Go to Configuration → Event → Event and Detection → Audio Exception Detection .
2. Select one or several audio exception detection types.
Audio Loss Detection
Detect sudden loss of audio track.
Sudden Increase of Sound Intensity Detection
Detect sudden increase of sound intensity. Sensitivity and Sound Intensity Threshold are
configurable.
Note
The lower the sensitivity is, the more significant the change should be to trigger the
●
detection.
The sound intensity threshold refers to the sound intensity reference for the detection. It is
●
recommended to set as the average sound intensity in the environment. The louder the
environment sound, the higher the value should be. You can adjust it according to the real
environment.
Sudden Decrease of Sound Intensity Detection
Network Camera User Manual
42
Advertisement
Table of Contents
