Table of Contents
Advertisement
4.3 Two-way Audio
It is used to realize the two-way audio function between the monitoring center and the target in
the monitoring screen.
Before You Start
Make sure the audio input device (pick-up or microphone) and audio output device (speaker)
●
connected to the device is working properly. Refer to specifications of audio input and output
devices for device connection.
If the device has built-in microphone and speaker, two-way audio function can be enabled
●
directly.
Steps
1. Click Live View.
2. Click
on the toolbar to enable two-way audio function of the camera.
3. Click
, disable the two-way audio function.
4.4 ROI
ROI (Region of Interest) encoding helps to discriminate the ROI and background information in
video compression. The technology assigns more encoding resource to the region of interest, thus
to increase the quality of the ROI whereas the background information is less focused.
4.4.1 Set ROI
ROI (Region of Interest) encoding helps to assign more encoding resource to the region of interest,
thus to increase the quality of the ROI whereas the background information is less focused.
Before You Start
Please check the video coding type. ROI is supported when the video coding type is H.264 or H.
265.
Steps
1. Go to Configuration → Video/Audio → ROI .
2. Check Enable.
3. Select the channel No. according to your need.
4. Select Stream Type.
5. Select Region No. and click
Note
Select the fixed region that needs to be adjusted and drag the mouse to adjust its position.
6. Input the Area Name and ROI Level.
7. Click Save.
Network Camera User Manual
to draw ROI region on the live view.
17
Advertisement
Table of Contents
