Table of Contents
Advertisement
The device focuses once after the PTZ and lens zooming. If the image is clear, the focus does
not change when the scene changes.
Manual
You can adjust the focus manually on the live view page.
Day/Night Switch
Day/Night Switch function can provide color images and black/white images in day and night
mode. Switch mode is configurable.
Day
The image is always in color.
Night
The image is black/white or colorful and the supplement light will be enabled to ensure clear
live view image at night.
Note
Only certain device models support the supplement light and colorful image.
Auto
The camera switches between the day mode and the night mode according to the light
condition of environment.
Scheduled-Switch
Set the Start Time and the End Time to define the duration for day mode.
Triggered by alarm input
You can set Triggering Status as Day or Night. For example, if the Triggering Status is Night, the
mode turns into Night when the device receives alarm input signal.
Triggered by video
The camera switches between the day mode and the night mode according to the light
condition of environment. This mode is applicable when the device supports road traffic and
vehicle detection.
Note
Day/Night Switch function varies according to models.
●
You can turn on the smart supplement light for better image effect. For supplement light
●
settings, refer to Supplement Light Settings .
Supplement Light Settings
You can set supplement light and refer to the actual device for relevant parameters.
Network Camera User Manual
19
Advertisement
Table of Contents
