Table of Contents
Advertisement
White Light Illuminator (If supported)
Possibly hazardous optical radiation emitted from this product.
●
DO NOT stare at operating light source. May be harmful to the eyes.
●
Wear appropriate eye protection or DO NOT turn on the white light when you assemble, install
●
or maintain the camera.
Transportation
Keep the device in original or similar packaging while transporting it.
●
System Security
The installer and user are responsible for password and security configuration.
●
Maintenance
If the product does not work properly, please contact your dealer or the nearest service center.
●
We shall not assume any responsibility for problems caused by unauthorized repair or
●
maintenance.
A few device components (e.g., electrolytic capacitor) require regular replacement. The average
●
lifespan varies, so periodic checking is recommended. Contact your dealer for details.
Cleaning
Please use a soft and dry cloth when clean inside and outside surfaces of the product cover. Do
●
not use alkaline detergents.
Using Environment
When any laser equipment is in use, make sure that the device lens is not exposed to the laser
●
beam, or it may burn out.
DO NOT expose the device to high electromagnetic radiation or dusty environments.
●
For indoor-only device, place it in a dry and well-ventilated environment.
●
DO NOT aim the lens at the sun or any other bright light.
●
Make sure the running environment meets the requirement of the device. The operating
●
temperature shall be -30 °C to 60 °C (-22 °F to 140 °F), and the operating humidity shall be 95%
or less (no condensing).
DO NOT place the camera in extremely hot, cold, dusty or damp locations, and do not expose it
●
to high electromagnetic radiation.
Emergency
If smoke, odor, or noise arises from the device, immediately turn off the power, unplug the
●
power cable, and contact the service center.
Network Camera User Manual
viii
Advertisement
Table of Contents
