Table of Contents
Advertisement
If the gas fire is not installed correctly, all warranty and/or
damage claims against Kalfire will be declared null and void. This gas fire has
been tested and approved according to CE standard EN-613. Every gas fire that
leaves the factory has been
tested for technical and functional adherence to relevant quality standards in
force.
This instruction is available in various languages on www.kalfire.com. All
translated instructions have been translated from a Dutch instruction, which is
the original document.
Disclaimer
All rights reserved. No part of this manual may be copied, distributed or
translated into other languages, in full or in part, without the prior written
permission of Kalfire. Kalfire reserves
the right to make changes to the manual. Kalfire, however, cannot provide any
warranty, implicitly or explicitly, for this manual. Any
risk is fully for the account of the user.
Copyright © 2023 Kalfire B.V. Geloërveldweg 21, Belfeld, The Netherlands
1.2
Pictograms
The following pictograms are used in this manual;
IMPORTANT!
Warning for explosive material. Mitigate
the risk of an explosion by carrying out these instructions carefully in the
vicinity of explosive materials.
DANGER!
Warning for flammable material. Follow
instructions to ensure that the possibility of fire thanks to the sudden ignition
of flammable materials is prevented.
WARNING
General warning. Mitigate the risk of injury by
carrying out the instructions carefully.
7
Advertisement
Table of Contents
