Input/Output] Menu - Furuno SATELLITE COMPASS SC-33 Operator's Manual

Menu item
CALN-SPD-POSN Set the height for calculating the 3-axis speed. Enter the distance from the bot-
Z (Height) tom of the ship to the position where you want to measure the ship's speed.
For example, enter the draft value when you want to measure the speed at
draft position.
3.3

[Input/Output] Menu

You can enable/disable PGN output from the SC-33 and adjust transmission rate on the [Input/
Output] menu.
The following table shows the PGNs that the SC-33 outputs and transmission rate is adjustable.
If you want to disable the PGN, set the transmission rate to "0 msec". The setting range changes
according to the PGN. For the setting range of each PGN, see "MENU TREE" on page AP-1.
Note: Normally, keep the default setting. If there is a need to change the transmission rate, only
change the rate for necessary PGNs. An excessive number of PGNs with a low transmission rate
can cause problems with PGN output and transmission rates.
PGN
065280 Heave
126992 System Time
126993 Heartbeat
127250 Vessel Heading
127251 Rate of Turn
127252 Heave
127257 Attitude
127258 Magnetic Variation
129025 Position, Rapid Update
129026 COG and SOG, Rapid Update
129029 GNSS Position Data
129033 Time and Date
129539 GNSS DOPs
129540 GNSS Sats in View
130310 Environmental Parameters
130312 Temperature
130314 Actual Pressure
130316 Temperature, Extended Range
130577 Direction Data
130578 Vessel Speed Components
130820 Motion Sensor Status
130826 Multi Sats In View
130842 Six Degrees of Freedom Movement
130843 Heel Angle and Roll Information
130845 Multi Sats In View Extended
130846 Motion Sensor Status Extended
Description
PGN name
19
3. ADJUSTMENTS