Envelope 1; Envelope 1 Controls - Intellijel Tangrams Manual

ENVELOPE 1

Envelope 1 Controls

[1.1] A (Attack Time) slider - Sets the time
required for Envelope 1 to rise from
zero (0V) to its maximum level (8V,
unless scaled via the LEVEL IN
jack). The higher the slider, the slower
the attack. The slider's overall time
range depends on the setting of the
ENV 1 SPEED
[1.2] D (Decay) time slider - Sets the time
required for Envelope 1 to decrease
from its maximum value to a level set
by the ENV 1 S (Sustain)
The higher the DECAY slider, the
slower the decay time. The slider's
time range depends on the setting of
the ENV 1 SPEED
[1.3] S (Sustain) level slider - Sets the
sustain level for Envelope 1, which is
the level at which the envelope
sustains while the gating envelope
remains high. The higher the slider,
the higher the sustain level. At the
bottom, there is no sustain (0V). At the
top, the sustain level is at the
maximum (8V, unless scaled via
the LEVEL IN
[1.4] R (Release) time slider - Sets the duration of Envelope 1's release stage. This is the time it
takes the envelope to return to 0V once the ENVELOPE GATE voltage goes low, The higher
the slider, the longer the release time. The slider's overall range depends on the setting of
the ENV 1 SPEED
[1.C]
[1.7] switch.
[1.3] slider.
[1.7] switch.
[1.C] jack).
[1.7] switch.
Tangrams Manual 7