Using The Ingredients Chute; Using A Smaller Bowl; Splash Extension Ring; Figure 2 Ingredients Chute - Univex SRM30 Operator's Manual

USING THE INGREDIENTS CHUTE

The ingredients chute provided with your mixer enables you to add ingredients to the bowl while the
mixer is running and without opening the Swing Ring Safety Guard. The chute may be installed on
the front or side of either half of the guard. Once the chute is properly installed, it can remain in place
permanently, if desired.
INGREDIENTS CHUTE INSTALLATION
Slide the bottom of the chute between horizontal safety guard rings and engage the chute onto the safety
guard.
INGREDIENTS CHUTE
FIGURE 2

USING A SMALLER BOWL

For maximum flexibility, a 20 quart bowl is available for use on the SRM30+ mixer. Specially sized
agitators must be used. See (Figure 3) on page 11 for the part numbers for these parts.
SPLASH / EXTENSION RING
A splash/extension ring (Figure 3 [J]) mounted to the bowl helps confine ingredients during the mixing
of certain recipes. Never use the ring to overload the bowl. Consult the Table of Mixing capacities
Figure 4 on page 12 for appropriate loads.
NOTE: Overloading the mixer beyond the factory specifications can damage the mixer and will void
the warranty.
Page 7