PROAIM CINEMA Series Assembly Manual page 2

Flyking PRO 4ft Mitchell Slider Setup
•
Loosen the castle ring present at the backside
of the Mitchell Slider using a castle wrench.
•
After loosening the castle ring, remove it from
the Mitchell slider.
•
Mount the Mitchell slider on a Mitchell stand
(Not Included), as shown in the image.
•
The Mitchell Slider is successfully mounted on
the Mitchell stand (Not
•
After mounting the slider, re-insert the castle
ring from the bottom of the slider.
•
Now, tighten the castle ring using a castle
wrench.
•
The castle ring has been properly attached to
the slider, ensuring a secure attachment
between the slider and the Mitchell stand
(Not Included).
Included).
2