Page 1
Megagrip Car/Vehicle Camera Mount (CM-MGGP) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below. Note: If you have purchased (CM-MGGP-00) kit, you will receive the following: 4 x Rubber Sleeves 3 x Suction Cups...
Page 2
Note: If you have purchased (CM-MGGP-01) kit, you will receive the following: 4 x Rubber Sleeves 3 x Suction Cups Camera Plate with Ball Head 3 x 24” Rods (Ø 16mm) 3 x 12” Rods (Ø 16mm) 3 x Rod 2 x Safety Straps Jointers Flight Case...
Page 3
Attach ball levelling camera plate with rod clamp and secure it carefully by tightening the knob. Repeat same process for rest of clamps. Although the Megagrip’s holding force is adequate for regular driving shots, safety belts/tension straps must be used for additional security.
Page 4
YOUR PROAIM MEGAGRIP CAR/VEHICLE CAMERA MOUNT ALL DRESSED UP AND READY TO GO! (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage.
Need help?
Do you have a question about the CINEMA Series and is the answer not in the manual?
Questions and answers