•
After mounting the Mitchell fluid head
(Not
Included), tighten the castle ring from the
bottom to secure the Fluid head.
•
Press the knob of the Fluid head and release
the top plate.
•
Attach the top plate of the fluid head with the
Camera
(Not Included)
threads and secure them using a screwdriver.
•
Slide the Camera
(Not Included)
head.
•
After mounting the Camera, press the locking
lever of the fluid head to lock the attachment.
•
Loosen the knob of the Mitchell plate of the
slider
and
move
requirement.
by matching their
onto the Fluid
the
plate
per
your
4