Product-Related Safety Notices - ABB OVR-15 Instruction, Operation And Maintenance Manual

I N T R O D U C T I O N
Following are the methods of recycle/disposal:
—
Table 1: Recycle/disposal methods
Raw Material
Iron
Stainless steel
Copper
Brass
Aluminum
Zinc
Thermoplastic
Rubber
Packing foil
Wooden pallet

1.3. Product-related safety notices

The OVR-15, 27 and 38 reclosers LV cabinet should
be installed within the design limitations as
described on its nameplate and in this manual.
In addition, always follow your company's standard
safety procedures.
For the safety of personnel performing
maintenance on the recloser or connecting
equipment, all components should be electrically
disconnected by means of a visible break and
securely grounded.
This manual uses the terms "ground" and
"grounding" as per IEEE. These are equivalent
to the IEC terms "earth" and "earthing."
This manual contains terms and expressions
commonly used to describe this type of equipment.
These instructions do not attempt to provide
the user of this equipment every possible answer
to questions that may arise in the application,
operation and maintenance of the product.
Recycle
Yes
Yes
Yes
Yes
Yes
Yes
Yes Make granulate, re-use or apply as energy superior
Yes
Yes
Yes High-grade energy additive in refuse incineration
Detailed descriptions of standard repair
procedures, safety principles and service
operations are not included. It is important to note
that this document contains some warnings and
cautions against some specific service methods
that could cause personal injury to service
personnel or could damage equipment or render
it unsafe. These warnings do not cover every
conceivable method in which service (whether or
not recommended by ABB) may be performed.
Secondly, ABB cannot predict or investigate all
potential hazards resulting from all conceivable
service methods. Anyone using service procedures
or tools, whether recommended by ABB, must be
completely certain that both their personal safety
and the safety of the equipment will not be
jeopardized by the service method or tools
selected.
All information contained in this manual is based on
the latest product information available at the time
of printing. The right is reserved to make changes
at any time without notice.
Also, as improvements in assemblies and parts
are made, some parts may differ in appearance
from what is depicted in illustrations; however,
the functionality will be equivalent.
Environmental effects and reuse processes
Separate, use instead of new source (ore)
Separate, use instead of new source (ore)
Separate, use instead of new source (ore)
Separate, use instead of new source (ore)
Separate, use instead of new source (ore)
Separate, use instead of new source (ore)
Cut into pieces and use as high-grade energy
Cut into pieces and use for landfills
5