Table of Contents
Advertisement
Instrumentation
2
4
1
2
5
6
16
1
3
2
5
3
4
8
7
Control panels
Control panels for the main control position and auxil-
iary control position.
1
1. Siren for acoustic alarm that sounds if one of the
warning lamps comes on.
2. Press button for instrument illumination.
3
3. Press button for testing and acknowledging
alarms (see "Warning displays" below).
6
4. Starting switch.
5. Start button.
6. Stop button.
Warning displays
If the acoustic alarm sounds, one of the warning dis-
play lamps will immediately start to flash to indicate
the cause of the alarm.
1. Coolant temperature too high.
2. Lubricant pressure too low.
3. Alternator not charging
4. Not used
5. Lubricant level too low* (accessory).
6. Coolant level too low* (accessory).
7. Water in fuel pre-filter (accessory).
8. Auxiliary (accessory).
* Warns for low level with stationary engine and starter key in position I
("Drive position"). Refill to correct level before starting the engine.
After an alarm
Press the "Alarm test" button to acknowledge and
terminate the acoustic alarm. The relevant warning
lamp will continue to flash until the fault has been
rectified.
Alarm test
After pressing the "Alarm test" button, the warning
lamps will come on and the acoustic alarm will start to
sound. Make a habit of always performing an alarm
test before starting.
Advertisement
Table of Contents
