Advantech MIC-770 User Manual page 73

SATA Controller Speed

Indicates the maximum speed the SATA controller can support by selecting
Default, Gen1, Gen2, Gen3.
Port 0~5

Enable or Disable SATA port 0~5.
Hot Plug

Enable or Disable SATA Hot-Plug.
Spin up Device

Enable or Disable spin up device.
SATA Device Type

To identify the SATA that is connected to a Solid State or Hard Disk Drive.
3.2.3.8 USB Configuration
XHCI Compliance mode

There is an option to Enable or Disable XHCI compliance mode. The default is
to disable compliance mode.
Figure 3.43 USB Configuration
61 MIC-770 User Manual