Route; Selecting A Detour In The Navigation System - Volvo SENSUS Manual

NAVIGATION
Show traffic disruptions along the

route

A list of traffic disruptions along the route can
be shown when a destination has been
entered in the navigation system*.
1. When the map appears, expand the left-
side toolbar using the down arrow and
then the three dots.
2.
Tap Ahead .
3. Tap Traffic
. If there are no traffic problems
along your route, the traffic button will be
grayed out.
> Any traffic problems along the route
will be displayed according to their dis-
tance from the vehicle.
4. For additional information about a traffic
disruption, tap the row to open an infor-
mation card. Select one of the information
card's options and follow the instructions.
5. Tap Avoid to avoid the traffic disruption.
> The route will be recalculated and guid-
ance will begin for the new route.
10 Only available in certain markets.
11 Only available in certain markets.
12 Real Time Traffic Information
22
Related information
Traffic disruptions on map (p. 21)
•
Traffic information settings (p. 26)
•
Information cards in the navigation sys-
•
tem* (p. 6)
Real Time Traffic Information (RTTI)
•
(p. 23)
Selecting a detour in the
navigation system*
Select a detour to avoid the next section of
the route, e.g. if the road is closed.
1. Expand the left-side toolbar using the
down arrow and then the three dots.
2.
Tap the Detour symbol to display an alter-
nate route with information on the new
distance and estimated travel time. Nor-
mally, only short detours are suggested to
take you quickly back to your original itin-
erary.
3. To accept the suggested detour: Tap the
sign with the detour information. The
route is also accepted if you begin driving
the suggested route. Once the suggestion
has been accepted, guidance will resume
using the detour as the new route. If you
do not accept the suggestion, continue
driving the original route.
Instead of choosing Detour , you can instead
select another route and leave your itinerary's
current route. The system will update the
* Option/accessory.