Volvo SENSUS Manual page 12

NAVIGATION
||
1. Give the command Go to
> You can now say the address you
would like route guidance to.
2. Say the street, e.g. Lombard Street"
3. Say the house number, e.g. "five"
4. Say the city, e.g. "San Francisco"
> The full command will then be: "
Lombard Street 5, San Francisco". Pro-
vided the address is found in the sys-
tem, the navigation system will now
provide route guidance to the address.
Using voice control for route guidance to
an address in another country or another
state
Your navigation system uploads sets of maps
for the country or state it believes your vehicle
is located in. This means that for accurate
route guidance across country or state bor-
ders, you need to first tell the system in which
country or state the address you would like
route guidance to is located. You do this by
using the command Change country
Change state . (Command
primarily used in the US. In the example
below, command Change country
3 Point Of Interest
10
. 1. Give the command
> You can now input the country in which
2. Now input the address you want route
guidance to by following the above proce-
dure for "Using voice control for route
guidance to an address".
Go to
> In this scenario, the full command is
NOTE
After you have changed country, try to pro-
nounce the address you want route guid-
ance to in the destination country's lan-
or
guage. This is required because the system
Change state is
automatically switches to the recognition
language of the selected country.
is used.)
Change country
the address you would like route guid-
ance to is located, e.g. "Canada".
divided into two sub-commands:
1. " Change country , Canada"
2. " Go to
Hastings Street, Vancouver"
If the address is found in the system,
the navigation system will now provide
route guidance to Hastings Street, Van-
couver, Canada
. Using voice control for route guidance
to an address set as Home
If you have set an address as a
in your navigation system, you can use a voice
command to receive route guidance to the
location.
Give the command
–
> If the navigation system has a home
location saved, you will now receive
route guidance to the location.
Using voice control for route guidance
to a place, store or other specific
business without inputting an exact
address
Your navigation system can provide route
guidance to specific places or types of busi-
nesses, which are referred to in the system as
"points of interest" (POI
of interest are restaurants, hotels, gasoline
stations, museums and tourist attractions.
Use the command Search
point of interest. You can search for a specific
point of interest or for categories of points of
interest.
Home location
Take me home .
3
). Examples of points
to search for a