Activating And Deactivating The Navigation System* In The Instru; Ment Panel; Navigation System* In Head-Up Display; Voice Control For Navigation System - Volvo SENSUS Manual

Activating and deactivating the
navigation system* in the
instrument panel
The navigation system will be automatically
displayed in the instrument panel when a
destination is set. The navigation system can
also be displayed without entering a destina-
tion.
1. Pull down the center display's Top view.
2. Tap Settings .
3. Tap My Car Displays
Information.
4. Tap the Show Map radio button to dis-
play the navigation system in the instru-
ment panel without entering a destination.
Related information
Navigation system* in the instrument
•
panel (p. 8)
Navigation system* in head-up
display*
The navigation system can be presented and
controlled in several different ways, e.g. via
the head-up display.
Driver Display
Navigation system in windshield.
The driver can also get guidance and informa-
tion from the navigation system in the head-up
display on the lower section of the windshield.
You can make settings to specify if the naviga-
tion system should be shown in the head-up
display, as well as the position of the informa-
tion field.
Related information
Navigation system* in center display (p. 6)
•
Navigation system* in the instrument
•
panel (p. 8)
Voice control for navigation
system*
If your vehicle is equipped with Sensus
Navigation, you can use voice commands to
control parts of your navigation system.
Start navigation
Here is an introduction to how you can begin
using voice commands to control the naviga-
tion system in your vehicle.
To activate a navigation command
Press the steering wheel keypad's voice
–
control button .
> You can now give commands, e.g.
" Navigation ", which will start a naviga-
tion dialog and show examples of com-
mands.
Using voice control to get directions to
an address
To get directions to a specific address, use the
Go to
command followed by the address. It is
important that the address is given in the right
order. To use voice control for route guidance
to an address, the address must be said in the
following order: (1) street address, (2) house
number, (3) city, as shown in the following
example.
* Option/accessory.
NAVIGATION
}}
9