Disposal - Bartscher 201TC Manual

Error code
E0
E1
E2
EN
E3
8

Disposal

Electrical Appliance
Electrical appliances should be returned to designated collection points.
22 / 22
Cause
No cookware on a hob or
inappropriate cookware.
Appliance is getting too
hot (e.g. due to
obstructed ventilation
openings).
A damaged element (e.g.
a transistor).
The overheating
protection has been
activated and the
appliance will switch off.
Short-lasting power cut.
Electric appliances are marked with this symbol. Electrical
appliances must be disposed of and recycled in a correct
and environmentally friendly manner. You must not dispose
of electric appliances with household waste. Disconnect the
appliance from the power supply and remove power cord
from the appliance.
Solution
Use only suitable cookware.
Open the passage through
ventilation openings. Leave the
appliance to cool down and re-start.
If the error code is still shown in the
digital display, contact the service
company.
Contact the service company.
Disconnect the appliance from mains
power supply. Remove cookware
from a hob.
Leave the appliance to cool down,
and re-start.
Disconnect the appliance from mains
power supply. After a few minutes,
plug the appliance in again.
Have an electrician to check the
electrical connection.
Disposal
105827