Figure 5. Remove the battery pack
Screw specifications
M2 x L3.5
Step 3.
Peel off the battery mylar.
Note: The battery mylar is reusable, carefully peel off it to avoid damage.
Figure 6. Peel off the battery mylar
Go to
https://support.lenovo.com/partslookup
part:
Battery pack
Battery mylar
Remove the solid-state drive (SSD)
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 26
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove the thermal pad.
28
Hardware Maintenance Manual
Number of screws
4
to look up the Lenovo part number of the following replacement