Remove The Solid-State Drive (Ssd) Plate - Lenovo IdeaPaId Pro 5i Hardware Maintenance Manual

Screw specifications
M2 x L5
Step 3. Remove the battery pack cable.
Figure 6. Remove the battery pack cable
Go to
https://support.lenovo.com/partslookup
replacement parts:
Battery pack
Battery pack cable

Remove the solid-state drive (SSD) plate

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 26
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2. Remove one screw and then remove the SSD plate.
Figure 7. Remove the SSD plate
Screw specifications
M2 x L3.5
Go to
https://support.lenovo.com/partslookup
part:
Solid-state drive (SSD) plate
28
Hardware Maintenance Manual
Number of screws
2
to look up the Lenovo part numbers of the following
Number of screws
1
to look up the Lenovo part number of the following replacement