Table of Contents
Advertisement
Figure 22. Remove the system board and the I/O board
Screw specifications
M2 x L3.5
Step 3.
Remove four screws and then remove the I/O board FPC from the system board and the I/O board.
Figure 23. Remove the I/O board FPC
Screw specifications
M1.2 x L2
Step 4.
Disconnect the I/O board cable from the system board.
Figure 24. Disconnect the I/O board cable
Step 5.
Remove the I/O board cable from the I/O board.
Number of screws
12
Number of screws
4
.
Chapter 4
Removing a FRU or CRU
37
Advertisement
Table of Contents
