Table of Contents
Advertisement
Figure 11. Detach the speaker cable connectors and release the speaker cable
Step 3.
Remove six screws and then remove the speakers.
Figure 12. Remove the speakers
Screw specifications
M2 x L1.8
M1.6 x L2
Go to
https://support.lenovo.com/partslookup
part:
Speakers
Remove the I/O board bracket
Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 26
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove two screws and then remove the I/O board bracket.
Number of screws
4
2
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
31
Advertisement
Table of Contents
