Remove The Solid-State Drive (Ssd) - Lenovo 8APU1 Hardware Maintenance Manual

Figure 9. Remove the SSD cable holder graphite
Go to https://support.lenovo.com/partslookup
replacement parts:
SSD cable holder graphite

Remove the solid-state drive (SSD)

Make sure the following FRU (or CRU) has been removed.
"Remove the game controller" on page 26
"Remove the lower case" on page 28
"Disconnect the battery pack cable" on page 29
"Remove the SSD cable holder graphite" on page 30
Step 1. Remove one screw and then remove the SSD by pulling it away from the slot.
Figure 10. Remove the SSD
Screw specifications
M2 x L2.5
Step 2. Remove the SSD mylar.
to look up the Lenovo part numbers of the following
Number of screws
1
.
Chapter 4 Removing a FRU or CRU
31