Advertisement
To install the grass catcher
1. Lift the rear cover.
2. Hold the grass catcher at the grass discharge
channel.
3. Lower the rear cover to lock the grass catcher into
position.
To install the mulch plug
1. Lift up the rear cover and remove the grass catcher.
2. Put the mulch plug (A) into the discharge channel.
3. Close the rear cover.
1904 - 002 - 04.11.2022
A
To change the product to rear
discharge mode (LC 521SP)
1. Lift the rear cover (A) and remove the mulch plug or
the grass catcher.
B
A
2. Push the rear cover lock (B) until you hear a click.
3. Release the rear cover into rear discharge position.
4. Do the opposite sequence to set into mulch mode
position.
To start the product
1. Make sure that the ignition cable is connected to the
spark plug.
2. Stay behind the product.
9
Advertisement
