Advertisement
To assemble the handle
1. Attach the lower handle with 2 screws and nuts on
each side of the product.
2. Lift the upper handle until it aligns with the lower
handle. Tighten the knobs.
CAUTION:
cause damage to the cables when you
lift the upper handle.
To assemble the grass catcher (LC
519AP)
Put the top part of the grass catcher onto the lower part
of the grass catcher.
1904 - 002 - 04.11.2022
Be careful and do not
To assemble the grass catcher (LC
521SP)
1. Put the grass catcher frame into the fabric grass
bag. Make sure that the handle on the grass catcher
frame is on top of the grass bag.
2. Attach the grass bag to the grass catcher frame with
the clips found on the fabric bag edge.
To assemble the spark arrester
(Optional accessory)
1. For LC 519AP, remove the engine cover.
2. Remove the screws that holds the muffler cover.
3. Remove the muffler cover.
4. Insert the spark arrester.
Note:
Make sure to align the holes in the spark
arrester and the muffler.
5. Attach the supplied screw
6. Attach the muffler cover and install the screws.
7
Advertisement
