Download Print this page

Husqvarna LC 519AP Operator's Manual page 3

Advertisement

Read the operator's manual carefully
and make sure that you understand the
instructions before use.
Keep persons and animals at a safe
distance from the work area.
Stop the engine and remove the ignition
cable before repairs or maintenance.
Stop the engine before repairs or
maintenance.
Look out for thrown objects and ricochets.
Warning: rotating blade. Keep hands and
feet clear.
Warning: rotating parts. keep hands and
feet clear.
Fast.
Slow.
The product agrees with applicable RCM
directives. Applies to AU/NZ only.
Noise emission to the environment
label as per EU and UK directives
and regulations, and New South Wales
legislation "Protection of the Environment
Operations (Noise Control) Regulation
2017". The guaranteed sound power level
of the product is specified in
data on page 16 and on the label.
Risk of fire.
1904 - 002 - 04.11.2022
Note:
certification requirements for other commercial areas.
Label on the product
DANGER – Keep hands and feet away.
Product liability
As referred to in the product liability laws, we are not
liable for damages that our product causes if:
the product is incorrectly repaired.
the product is repaired with parts that are not
Technical
from the manufacturer or not approved by the
manufacturer.
the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
the product is not repaired at an approved service
center or by an approved authority.
Do not breathe in exhaust fumes.
The exhaust fumes from the engine
contain carbon monoxide, an odourless,
poisonous and very dangerous gas. Do
not start the engine indoors or in closed
spaces.
Hot surface.
Rear cover position for rear discharge
mode.
Rear cover position for mulch mode.
Fill the engine with oil before
you start the product..
Other symbols/decals on the product refer to
3

Advertisement

loading

This manual is also suitable for:

Lc 521sp970 60 92-01