Sharp MX-C557F User Manual page 87

Understanding the printer menus
PDF
Menu item
Scale To Fit
Off*
On
Annotations
Print
Do Not Print*
Print PDF Error
Off
On*
Note: An asterisk (*) next to a value indicates the factory default setting.
PostScript
Menu item
Print PS Error
Off*
On
Minimum Line Width
1–30 (2*)
Lock PS Startup Mode
Off
On*
Image Smoothing
Off*
On
Font Priority
Resident*
Flash/Disk
Wait Timeout
Off
On* (40 seconds)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Scale the page content to fit the selected paper size.
Specify whether to print annotations in the PDF.
Enable the printing of PDF error.
Description
Print a page that describes the PostScript® error.
Note: When an error occurs, processing of the job stops, the printer
prints an error message, and the rest of the print job is flushed.
Set the minimum stroke width.
Notes:
•
Jobs printed in 1200 dpi use the value directly.
•
Jobs printed in 4800 CQ use half the value.
Disable the SysStart file.
Enhance the contrast and sharpness of low‑resolution images.
Note: This setting has no effect on images with a resolution of 300 dpi or
higher.
Establish the font search order.
Notes:
•
Resident sets the printer to search its memory for the requested font
before searching the flash memory or printer hard disk.
•
Flash/Disk sets the printer to search the flash memory or printer hard
disk for the requested font before searching the printer memory.
•
This menu item appears only when a flash memory or hard disk is
installed.
Enable the printer to wait for more data before canceling a print job.
87