Scanning To An Ftp Server; Creating An Ftp Shortcut; Scanning To A Network Folder - Sharp MX-C358F User Manual

Scan
For Macintosh users
Note: Make sure that the printer is added to the computer. For more information, see
computer" on page 50.
1
Load an original document into the automatic document feeder or on the scanner glass.
2
From the computer, do either of the following:
•
Open Image Capture.
•
Open Printers & Scanners, and then select a printer. Click Scan > Open Scanner.
3
From the Scanner window, do one or more of the following:
•
Select the location that you want to save the scanned document.
•
Select the size of the original document.
•
To scan from the ADF, select Document Feeder from the Scan Menu or enable Use Document Feeder.
•
If necessary, configure the scan settings.
4
Click Scan.

Scanning to an FTP server

1
Load the original document into the ADF tray or on the scanner glass.
2
From the home screen, touch FTP, and then enter the needed information.
3
If necessary, configure other FTP settings.
4
Send the FTP job.

Creating an FTP shortcut

1
From the home screen, touch FTP.
2
Enter the FTP server address, and then touch
3
Create a shortcut.

Scanning to a network folder

1
Load the document into the ADF tray or on the scanner glass.
2
From the home screen, touch Scan Center.
Note: The icon and name may have been changed. For more information, contact your administrator.
3
Do either of the following:
•
Select a destination.
Note: For SFTP, set the port number to 22.
•
Use a shortcut by touching
4
Scan the document.
.
, and then selecting the shortcut from the list.
89
"Adding printers to a