Removing The Input/Output (I/O) Panel - Dell OptiPlex XE2 Small Form Factor Owner's Manual

3. Install the:
a. drive cage
b. optical drive
c. front bezel
d. cover
4. Follow the procedure in

Removing the Input/Output (I/O) Panel

1. Follow the procedure in
2. Remove the:
a. cover
b. optical drive
c. drive cage
d. front bezel
3. Disconnect the I/O panel or FlyWire cable and the audio cable from the system board.
4. Remove the screw that secures the I/O panel to the chassis. Then, slide the I/O panel to release and remove it from
the computer.
24
After working inside your computer.
Before working inside your computer.