Removing The Speaker; Installing The Speaker - Dell OptiPlex XE2 Small Form Factor Owner's Manual

4. Install the:
a. drive cage
b. optical drive
c. cover
5. Follow the procedure in

Removing the speaker

1. Follow the procedure in
2. Remove the:
a. cover
b. optical drive
c. drive cage
3. Disconnect the speaker cable from the system board and release it from the securing tab inside the chassis. Press
the speaker-securing tab, and slide the speaker towards the right of the computer to release it.

Installing the Speaker

1. Place the speaker at the appropriate location on the chassis.
2. Press the speaker-securing tab and slide the speaker towards the left of the computer to secure it.
3. Guide the speaker cable through the securing tab and connect the speaker cable to the system board.
4. Install the:
a. drive cage
b. optical drive
c. cover
5. Follow the procedure in
After working inside your computer.
Before working inside your
After working inside your computer.
computer.
19